RAISE3D Filament Industrial PPA CF 1.0kg 1.75mm, 234.00 CHF

Raise3D Industrial PPA CF Filament black

A high-performance composite filament for end-use applications

Raise3D Industrial PPA CF Filament is carbon fiber reinforced composite filament material based on PPA (polyphthalamide or high-performance/high-temperature Nylon). Thanks to its high performance Nylon matrix, this composite filament has superior mechanical and thermal properties than other Nylon filaments. With well controlled dispersion and length-distribution of chopped carbon fibers (15 wt.%), the PPA CF has lower density, lower moisture absorption, high strength and rigidity, high wear and creep resistance, excellent chemical and heat resistance. It is promising for end-use applications in automotive, aerospace, electrical and electronics (E&E) industry.

High rigidity and strength
Better thermal performance
Lower moisture absorption
Dimensional stability
Chemical resistance
High strength-to-weight ratio

Compatibility: Raises3D Industrial PPA Support Filament

Applications

Automobile
Aerospace
Electrical and electronics (E&E) industry
Industrial end-use parts

Printing Parameter

Nozzle temperature : 290°C - 310°C
printing platform temperature : 65°C - 80°C
printing layer thickness : 0,1 mm - 0,25 mm
printing speed : 30 mm/s - 120 mm/s
Fan: off
Drying temperature : 80°C - 110°C for 4 - 6 hours

Printing Notifications:

Abrasion of the brass nozzle happens frequently when printing PPA CF. Using abrasion resistance nozzle, as hardened steel and above grade nozzle is highly recommended.
After the printing, it is recommended to anneal the model with support material in the oven at 80-100°C for 8 to 12 hours to improve mechanical property and dimensional accuracy.