PPPRINT Polypropylene Test-Kit 2.85mm, 15.70 CHF

Description
Reviews

PPrint Polypropylene Test-Kit 2.85mm

The ‘PPprint Test-Kit’ consists of each 20g filament sample of the P-filament 721 natural, white and black with a filament diameter of 2.85 mm, a print bed surface ‘P-surface 141’ of a size of 139x139mm and a double-sided adhesive film ‘P-adhesive 220’ of a size of 139x139mm.

The PPprint Test-Kit offers the possibility to test our products and extrusion based 3D printing with polypropylene. The Test-Kit provides easy handling and reliable extrusion-based 3D printing with PP-filaments. The included printing surface (P-surface 141) guarantees optimized adhesion during printing and allows easy and non-destructive removal of components and objects after completion. The PP material used for filament production is food safe and optimized for reduced warpage and shrinkage. It allows 3D printing of light, but at the same time very robust and stable objects and components. We recommend to start 3D printing with a printing bed temperature of 80°C for the first layer and to let it cool down to room temperature afterwards. This is because at low temperatures the adhesion of the printed object to ‘P-surface 141’ becomes even stronger. After completion of the print, it is best to heat the printing bed to 100-110°C, wait about 20 minutes for the temperature to reach the print object, and then remove the print object by slightly tilting and lifting it.

The ‘PPprint Test-Kit’ consists of filament sample of the ‘P-filament 721 natural, white and black’ with a filament diameter of 2.85 mm and the specially developed print bed pad ‘P-surface 141’. This special printing bed support for extrusion-based 3D printing is patent pending. The double-sided adhesive film ‘P-adhesive 220’ is used to fix the ‘P-surface 141’ in the printer. Further information on the individual components of the ‘PPprint Test-Kit’ can be found in the descriptions of ‘P-filament 721 natural’, ‘P-surface 141’ and ‘P-adhesive 220’.

Technical Data Sheet

Storage instructions:
To ensure constant print performance, ‘P-filament’ should be used as soon as possible after opening (preferably within 15 months). It is recommended to store opened material at a temperature of 15 – 25°C and in a plastic bag to avoid dust contamination.

Brands:	PPprint
Filament diameter:	2.85mm
Shipping weight:	0,20 kg
Content:	1,00 Pcs.
Notice / Warning:	Please note that there is no right of return on articles with special prices! For machines with special prices, the guarantee is waived unless otherwise stated.

There are no reviews yet.

Others also bought:

RAISE3D Pro3 Extruder Bearings

6.90 CHF *