Builder Extreme 2000 PRO 3D large scale printer
The Extreme 2000 PRO takes large scale 3D printing to a higher and more professional level. With its giant build volume of 700x700x1700 mm (XYZ), it’s one of the biggest FDM 3D printers available, which makes it ideal for professional and industrial use. From 3D printing prototypes, moulds, tooling and more, the easy to use Builder Extreme 2000 PRO will print high quality industrial grade parts time after time.
Brochure Extreme 2000 Pro
7 inch touchscreen – easy to use interface
The 7 inch touch screen allows you to have full adjustment control over the Extreme 2000 PRO and the printed object. You can control the nozzle and bed temperature, but also control light, filament change and many more. It even plays instruction videos. With the on-board camera you can check the progress of the print and the Wi-Fi allows you to upload files to the Extreme 2000 PRO.
Dual-Feed extruder – Most versatile extruder
The innovative and versatile direct drive extruder has been designed for non-stop printing. The Dual-Feed extruder is able to print dual coloured objects, but can also be used as a mono extruder when inserting 2 of the same filament spools. The easy to swop nozzle can be replaced for a smaller/bigger nozzle diameter to influence print quality/time.
Fully closed housing
The fully closed housing combined with the heated bed positively influence the print quality of the printed object but also reduces the sound of the machine by 40%. The transparent doors allow you to monitor the printing process at all times. For safety reasons the doors can only be opened when the print is paused. The Extreme 2000 PRO is air filter ready and the BOFA air filter can be added to the Extreme 2000 PRO as an option.
The Extreme 2000 PRO has been designed efficiently to be able to offer place to all its key features without sacrificing print volume. Despite its huge print volume, the Extreme 2000 PROis optimal for all workspaces. The filament spools and control box are integrated in the closed housing and will open for easy access, when slightly pushing the panels. The 7 inch touch screen is ergonomically placed at a level for comfortable use
Fused Filament Fabrication (FFF)
Mono or Dual-Feed extruder
700x700x1700 mm (XYZ)
Layer height resolution
0.1 – 0.8 mm
(depending on the nozzle)
Up to 120 mm/s
Up to 200 mm/s
Heated glass build plate
up to 70 °C (heated in 10 minutes)
Semi-automatic. (auto levelling expected Q2 2019)
0.4, 0.8, 1.2 mm (easy to swop)
1400 watt, after heating 800 watt
Wi-Fi, USB port, Ethernet
7 inch full colour touch screen
Live camera view from desktop or mobile device
Resume after power outage
Safety locking system
Doors only open after print is paused
134x105x224 cm (LxWxH)
142x110x237 cm (LxWxH)