PrimaCreator FlexPlate - PEI 410x410 mm

  • PrimaCreator FlexPlate - PEI 410x410 mm
  • PrimaCreator FlexPlate - PEI 410x410 mm
  • PrimaCreator FlexPlate - PEI 410x410 mm

99.50 CHF

7.7 % VAT incl. excl. Shipping costs

Shipping time: in stock

Stock: 3

Product no.: PrimaCreator.Flex410

Manufacturer information: PrimaCreator

More products   

  • Details
  • Recommendation
  • Customer-tip
  • Reviews

Details

PrimaCreator FlexPlate - PEI 410 x 410 mm

Fits: Creality CR-10S4, German RepRap X400, FORMBOT Raptor, T-REX and 2+ , Vivedino T-Rex 3.0 and Raptor 2, gCreate gMax.

The new FlexPlate from PrimaCreator consists of three parts. The first one is the magnetic surface that you will attach to the printers bed. The second and third one is the high quality spring steel sheet that is covered with a sheet of the best PEI Ultem .

The Flexplate PEI is the perfect surface to print on, it´s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.

PrimaCreator FlexPlate PEI is based on a ferrit core which is much more heat resistant than neodymium magnets. The FlexPlate can withstand temperatures up to 130°C without any problems, so you can even use it with ABS.

PEI Ultem (Polyetherimide) from PrimaCreator is a reusable, relatively maintenance free, build surface for both ABS (with a Heated bed) and PLA (hot or cold), other materials such as Metal, Wood, PETG, ABS+ and many others also works just fine. You don’t require any additional adhesives such as glue or tape. PEI is appealing due to its "no-surface-prep" conditions, which make it convenient to work with. Additionally, printing on PEI requires no support rafts as parts adhere directly to the surface with no issue.

How To Use.
Unpack your FlexPlate, attach the magnetic surface to your print bed and then attach the spring steel plate with the PEI attached to it onto the magnetic surface. Remove the protective film from the PEI and re-level your print bed. You are now ready to print away. Parts should come free from the surface with almost no issue at all. PLA does not require heat but turning the heated bed up to 45C helps. You don´t need any adhesives but if you are going to print something large or for a long time, we recommend using the PrimaFix adhesive stick, it will make your parts stick even better and release even easier when the print is done.  After the print is done, just let the plate cool down, remove the plate and give it a gentle bend. You can then just “pop” the model off the plate.
Before each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you wipe away any grease or other residues that may have accumulated on the surface. This will help increase your surface adhesion greatly.
Use acetone, isopropyl alcohol, methyl alcohol, or soap to clean your PEI after use.


Recommendation

Recommended products:

WANHAO Duplicator 9/400 Mark II

WANHAO Duplicator 9/400 Mark II

WANHAO Duplicator 9/400 Mark II 3D Printer 400x400x400mm, BL Touch automatic bed levelling, Touch Display

from 875.00 CHF

Details

Customer-tip

Customers who bought this product also bought the following products:

Extruder cleaner wire for 1.75 mm 3D printers

Extruder cleaner wire for 1.75 mm 3D printers

Extruder cleaner wire for 1.75 mm 3D printers

5.80 CHF

Details
AprintaPro Cleaningfilament 50gr, 1.75mm

AprintaPro Cleaningfilament 50gr, 1.75mm

AprintaPro Cleaningfilament 50gr, 1.75mm, for clogged nozzles.

9.80 CHF

Details
PrimaCreator FlexPlate - PEI 310x310mm

PrimaCreator FlexPlate - PEI 310x310mm

PrimaCreator FlexPlate - Durable flexible permanent print plate, 310x310mm, suitable for Wanhao D9 / 300

59.50 CHF

Details
WANHAO Duplicator 9/400 Mark II

WANHAO Duplicator 9/400 Mark II

WANHAO Duplicator 9/400 Mark II 3D Printer 400x400x400mm, BL Touch automatic bed levelling, Touch Display

from 875.00 CHF

Details
WANHAO Duplicator 9 SwissFinish Kit

WANHAO Duplicator 9 SwissFinish Kit

WANHAO Duplicator 9 Mark II Swiss Finish Kit - Upgrade, orderable with every D9 MKII printer

395.00 CHF

Details
PETG Spectrum Deep Black 1.75mm 1kg

PETG Spectrum Deep Black 1.75mm 1kg

PETG Spectrum Deep Black RAL 9017, 1.75mm 1kg, for high qualtiy printouts

28.50 CHF

Details

Reviews

Customer reviews:

Write evaluation
Product 24 of 41 in this category
Parse Time: 0.209s