PhotoCentriC UV Hard Resin-LCD Black 1kg

  • PhotoCentriC UV Hard Resin-LCD Black 1kg

79.00 CHF

7.7 % VAT incl. excl. Shipping costs

Shipping time: 3-7 days

Stock: 2

Product no.: PHC.LCD.Hard.Black.1kg

Manufacturer information: PhotoCentriC

PhotoCentriC Homepage
More products   

  • Details
  • Reviews

Details

PhotoCentriC UV Hard Resin-LCD Black 1kg

Glass-like prints with a crisp finish are obtained when using our Hard 3D Resin. Prints will retain their shape under stretch and compression whilst displaying a high stiffness and high hardness. When using our Hard Resin you will 3D print objects that behave like commercial ABS.

Compatibility: UV LCD resin for use with UV LCD printers only such as the D7, Anycubic Photon, Kudo Bean and many more

UV LCD Resin Settings
Below is a complete profile set of recommended settings for the UV LCD range to use on the Wanhao D7 and Anycubic Photon printer ranges.

To access these profiles in creation workshop, download and extract the profiles below. Then copy the ones required to the ‘Profiles’ folder in your Creation Workshop folder. Make sure that only the “.slicing” files are in the profiles folder.

The recommended settings containing in these profiles are designed to achieve successful prints however for optimal results you may need to adjust your settings slightly depending on the model part, model supports and orientation. If this is the case, you can manually adjust the settings to best suit your printing requirements.

D7 Settings

Anycubic Photon Settings

Viscosity
(At 25ºC Brookfield spindle 3)

230 cPs

Hardness
(After post exposure)

77 Shore D

Tensile strength 
(ASTM D638 After Post Exposure)

35 MPa

Tensile strength
(ASTM D638 Before Post Exposure)

15 MPa

Tensile Modulus
(ASTM D638 After Post Exposure)

 2000 MPa

Elongation at break 
(ASTM D638 After Post Exposure)

<1.5%

Storage 

1050°C

Density

1.19 g/cm3

   Saftey Datasheet

   TDS Technical Data Sheet

NOTE: Objects will have full strength only after 2H post exposure under UV light (36W). If you post expose for less time, objects will be weaker.


Reviews

Customer reviews:

Write evaluation
Product 2 of 6 in this category
Parse Time: 0.168s