PhotoCentriC UV Firm Resin-LCD Black 1kg
Need some resin to make you items feel more realistic? Our Firm Resin is the way to go. Ideal for creating parts that hold their shape whilst also being able to bend and flex slightly without snapping. This resin produces parts with similar mechanical behaviour to that of Polypropylene.
Compatibility: UV LCD resin for use with UV LCD printers only such as the D7, Anycubic Photon, Kudo Bean and many more
UV LCD Resin Settings
Below is a complete profile set of recommended settings for the UV LCD range to use on the Wanhao D7 and Anycubic Photon printer ranges.
To access these profiles in creation workshop, download and extract the profiles below. Then copy the ones required to the ‘Profiles’ folder in your Creation Workshop folder. Make sure that only the “.slicing” files are in the profiles folder.
The recommended settings containing in these profiles are designed to achieve successful prints however for optimal results you may need to adjust your settings slightly depending on the model part, model supports and orientation. If this is the case, you can manually adjust the settings to best suit your printing requirements.
(At 25ºC Brookfield spindle 3) 560 cPs
(After post exposure) 65 Shore D
(ASTM D638 After Post Exposure) 26 MPa
(ASTM D638 Before Post Exposure) 10 MPa
(ASTM D638 After Post Exposure) 700 MPa
Elongation at break
(ASTM D638 After Post Exposure) 10%
TDS Technical Data Sheet
NOTE: Objects will have full strength only after 2H post exposure under UV light (36W). If you post expose for less time, objects will be weaker.