Proto-Pasta HT PLA 2.0v 2.85mm - Iridescent Ice

  • Proto-Pasta HT PLA 2.0v 2.85mm - Iridescent Ice
  • Proto-Pasta HT PLA 2.0v 2.85mm - Iridescent Ice

49.90 CHF

7.7 % VAT incl. excl. Shipping costs

Shipping time: in stock

Stock: 3

Product no.: ProtoPasta.HTR.PLA.ICE.2.85

Manufacturer information: Proto-Pasta

Proto-Pasta Homepage
More products   

  • Details
  • Customer-tip
  • Reviews

Details

Proto-Pasta High Temp PLA 2.0v 2.85mm - Iridescent Ice

Proto-pasta's HTPLA v2.0 is better than the original kickstarted version. This new formulation is higher performing and lower cost. HTPLA prints similar to standard PLA but is "Hella Tough" and can be "Heat Treated" for "Higher Temperature" resistance. This durable PLA has a theoretical Heat Deflection Temperature (HDT) of more than 140C (285F) after heat treating though in our experience 120C or more was practically attained.  This means HTPLA parts maintain strength and form to much higher temperatures than PLA, ABS, or Polyesters like PET which loose structure as soon as 55C and by 100C.

How do you "Heat Treat" for maximum performance? Bake your parts into a oven until you see a change from translucent to opaque. Yes, there is an obvious visual change indicating the improved performance! We had good luck in a lab oven at 110C (230F) for an hour or less. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass, ceramic, or composite), and letting them cool in the oven to minimize distortion. Parts can be baked at a lower temperature (though must be above 60C for any change to occur) for a longer time with less risk of unwanted deformation.
  • Available in 1.75 & 2.85 (3) mm diameter
  • Colors include Iridescent Ice & Silver Smoke
  • 500g 8" diameter spool only

No abrasive fillers so expect normal wear with standard nozzles.

Customer-tip

Customers who bought this product also bought the following products:

LokBuild 3D Print Surface 305 x 305mm

LokBuild 3D Print Surface 305 x 305mm

LokBuild 3D Print Surface 305 x 305mm, single foil,

24.00 CHF

Details
BCN3D Hotend 1.0mm by e3D for SIGMA/X

BCN3D Hotend 1.0mm by e3D for SIGMA/X

BCN3D Hotend 1.0mm for SIGMA/X

Our previous price 89.00 CHF
Now only 75.65 CHF
you save 15 % / 13.35 CHF

Details
PLA Pro Filament 2.85mm 1kg Natural

PLA Pro Filament 2.85mm 1kg Natural

PLA Pro Spectrum Filament 2.85mm 1kg, Natural

29.50 CHF

Details
PLA Pro Filament 2.85mm 1kg Aurora Gold

PLA Pro Filament 2.85mm 1kg Aurora Gold

PLA Pro Spectrum Filament 2.85mm 1kg, Aurora Gold metalic

37.50 CHF

Details
PLA Matt finish Filament 2.85mm 1kg Lion orange

PLA Matt finish Filament 2.85mm 1kg Lion o...

PLA Spectrum Matt finish Filament 2.85mm 1kg Lion orange

Our previous price 39.50 CHF
Now only 35.55 CHF
you save 10 % / 3.95 CHF

Details
PLA Soft 3d Filament natural 2.85mm 1kg

PLA Soft 3d Filament natural 2.85mm 1kg

PLA Soft 3d Filament natural 2.85mm 1kg, Flexible and elastic Soft-PLA filament

49.50 CHF

Details

Reviews

Customer reviews:

Write evaluation
Product 23 of 30 in this category
Parse Time: 0.220s