ProFill PLA-Tec Filament 2.85mm 1kg natural white
ProFill PLA-Tec is a industrial high performance PLA which features extreme performance on speed, mechanical properties and high heat environments. ProFill PLA-Tec is perfect for printing speeds of > 120mm/s, allowing you to be more efficient in the same time. Users who use a lot of ABS now have a bio-based alternative material with all the advantages of ABS and none of the disadvantages like shrinking and delamination.
Due to the composition of ProFill PLA-Tec the material is already highly crystalline after printing, which increases the stiffness of the material at higher temperatures. When you combine this with annealing the ProFill PLA-Tec the material reaches an HDT of 95°C+. Compared to other high temp. resistant PLA types ProFill PLA-Tec has the USP of negligible small shrinkage after annealing (the dimensional accuracy is superb).
ProFill PLA-Tec has been specifically engineered for industrial applications where you want an easy to print filament with high mechanical properties. Objects that are printed with ProFill PLA-Tec will have a semi matte finish which not only looks great but helps concealing layer lines.
ProFill PLA-Tec advantages:
- Prints like PLA, performs like ABS
- Engineered for fast printing upt to 120mm/s
- ABS matching mechanical properties
- Great heat resistance up to 80°C without heat treatment
- HDT after annealing 100°C+
- Semi matte finish after printing
Filament is reeled on the neat, transparent spool.
230 - 250°C
Heated bed temperatur
Due to the low warp effect is not absolutely necessary. Recommended about 35 - 60 ° C
very low > 0.3%
reel hight: 76mm
Hub hole diameter: 53mm
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
Each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to obtain the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height.
|Specific gravity||ISO 1183||1,27g/cc|
|MFR 210°C / 2,16 kg||ISO 1133||6 g/10 min*|
|Tensile strength||ISO 527||40 Mpa|
|Strain at break||ISO 527||47%|
|Tensile modulus||ISO 527||4000 Mpa|
|Impact strength – Charpy notched 23°C||ISO 179||23 kJ/m²|
|Heat deflection temp. (B) (after annealing)||ISO 75||95°C+|
Customers who bought this product also bought the following products: