PLA ProFillTM Filament 2.85mm orange RAL 2008
The new ProFillTM Premium Filament is the product of collaboration between 3D-Printerstore.ch and main filament developers of Europe.
Uniformity and precision in manufacturing, and an outstanding flow and print characteristics of our filaments, lead to better and consistent print results.
High demands on the printed object and not on the best price of filament - these were the motivations to develop the new ProFillTM Premium Line.
Clearly structured RAL colors - best printing performance - waiving frills - only professional quality!
PLA ProFillTM is a robust and high-quality 3D filament, suitable for all common FDM printer. It is easy to use, making it ideal for the most demanding 3D printing.
Despite the slightly modified composition, our filament retains the familiar and typical properties of PLA. It is thus a little more stable and less brittle than ordinary PLA.
Due to a lower shrinkage factor our ProFillTM PLA will not deform even after cooling.
Polylactic acid is a biodegradable plastic from renewable, natural resources and has thus become the most popular material for 3D printing.
Heated bed temperatur
Due to the low warp effect is not absolutely necessary. Recommended about 35 - 60 ° C
reel hight: 65mm
Hub hole diameter: 53mm
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
Each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to obtain the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height.
Technical specifications ProFillTM
|melting temp.||210˚C ± 10˚C|
|melting point||ASTM D3418||145-160˚C|
|vicat softening temp.||ISO 306||± 60˚C|
|Specific gravity||ASTM D1505||1,24 g/cc|
|Melt Flow Index||6,0 g/10 min|
|Tensile strength||ASTM D882||110 MPa (MD)
145 MPa (TD)
|Elongation at break||ASTM D882||160% (MD)
|Tensile modulus||ASTM D882||3310 MPa (MD)
3860 Mpa (TD)
|Impact Strength||7,5 KJ/m²|
|1,75mm||± 0,05mm||≥ 95%|
|2,85mm||± 0,10mm||≥ 95%|
This product is compatible with:
Customers who bought this product also bought the following products: