PLA Pro Filament 2.85mm 1kg Pearl Gold
Filament Spectrum PLA Pro was manufactured using raw materials developed for 3D printing!
PLA Pro combines two desired features: ease of printing as with normal PLA material while maintaining properties comparable to ABS. Filament Spectrum PLA Pro, after printing, exhibits almost 50% higher impact strength than ABS material. Therefore, when printing from Spectrum PLA Pro, we avoid any difficulties such as: shrinkage or unpleasant odors occurring when printing with ABS.
Filament Spectrum PLA Pro can be treated like HT PLA at about 95 ° C in the oven for 10-15min. After cooling, the model receives an increased (up to about 85 ° C) thermal resistance and almost twice as high impact resistance as ABS.
The material is also characterized by an increased flow index, which simplifies printing and leads to smoother surfaces!
PLA Pro advantages:
- a good alternative to styrene-based materials
- printing possible without hot pad
- easy separation of the object from the table
- high strenghtness better than ABS
- no shrinkage after cooling
- not flammable
- ideal side surface of printouts
Filament is reeled on the neat, transparent spool.
In the original Spectrum Filaments packaging.
Heated bed temperatur
Due to the low warp effect is not absolutely necessary. Recommended about 35 - 60 ° C
reel hight: 76mm
Hub hole diameter: 53mm
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
Each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to obtain the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height.
Customers who bought this product also bought the following products: