PLA Pro Filament 2.85mm 1kg Chocolate Brown

  • PLA Pro Filament 2.85mm 1kg Chocolate Brown
  • PLA Pro Filament 2.85mm 1kg Chocolate Brown
  • PLA Pro Filament 2.85mm 1kg Chocolate Brown
  • PLA Pro Filament 2.85mm 1kg Chocolate Brown

29.50 CHF

7.7 % VAT incl. excl. Shipping costs

Shipping time: in stock

Stock: 9

Product no.: PLA.Pro.brown.2.85

Manufacturer information: Spectrum Filament

Spectrum Filament Homepage
More products   

For further information, please visit the homepage of this product.
  • Details
  • Customer-tip
  • Reviews

Details

PLA Pro Filament 2.85mm 1kg Chocolate Brown

Filament Spectrum PLA Pro was manufactured using raw materials developed for 3D printing!

PLA Pro combines two desired features: ease of printing as with normal PLA material while maintaining properties comparable to ABS. Filament Spectrum PLA Pro, after printing, exhibits almost 50% higher impact strength than ABS material. Therefore, when printing from Spectrum PLA Pro, we avoid any difficulties such as: shrinkage or unpleasant odors occurring when printing with ABS.

Filament Spectrum PLA Pro can be treated like HT PLA at about 95 ° C in the oven for 10-15min. After cooling, the model receives an increased (up to about 85 ° C) thermal resistance and almost twice as high impact resistance as ABS.

The material is also characterized by an increased flow index, which simplifies printing and leads to smoother surfaces!

PLA Pro advantages:

  • a good alternative to styrene-based materials
  • printing possible without hot pad
  • easy separation of the object from the table
  • high strenghtness better than ABS 
  • no shrinkage after cooling
  • not flammable
  • ideal side surface of printouts

Filament is reeled on the neat, transparent spool. 

In the original Spectrum Filaments packaging.

Printing temperatur
195-220 °C

Heated bed temperatur
Due to the low warp effect is not absolutely necessary. Recommended about 35 - 60 ° C

Warp effekt

very low

Reel size

diameter:  200mm
reel hight:  76mm
Hub hole diameter: 53mm

Storage
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.

Each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to obtain the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height.

 

Customer-tip

Customers who bought this product also bought the following products:

PETG Spectrum Transparent Red 2.85mm 1kg

PETG Spectrum Transparent Red 2.85mm 1kg

PETG Spectrum Transparent Red 2.85mm 1kg, for high qualtiy printouts

28.50 CHF

Details
PLA Pro Filament 2.85mm 1kg Rust Copper

PLA Pro Filament 2.85mm 1kg Rust Copper

PLA Pro Spectrum Filament 2.85mm 1kg, Rust Copper

29.50 CHF

Details
LokBuild 3D Print Surface 203 x 203mm

LokBuild 3D Print Surface 203 x 203mm

LokBuild 3D Print Surface 203 x 203mm, single foil,

12.00 CHF

Details
PEI Ultem Print Surface 254x254mm/0.4mm

PEI Ultem Print Surface 254x254mm/0.4mm

PEI Ultem Sheet Print Surface 254x254mm, 0.4mm with 3M 468MP Adhesive Tape, can be cutted

15.50 CHF

Details
Workday PLA Ingeo 3D850 grey 2.85mm 1kg

Workday PLA Ingeo 3D850 grey 2.85mm 1kg

Workday PLA Ingeo 3D850 grey 2.85mm 1kg per spool, biologically harmless

Our previous price 27.50 CHF
Now only 23.50 CHF
you save 15 % / 4.00 CHF

Details

Reviews

Customer reviews:

Write evaluation
Product 25 of 29 in this category
Parse Time: 0.223s