PLA Ingeo 3D870 white 2.85mm 1kg

  • PLA Ingeo 3D870 white 2.85mm 1kg
  • PLA Ingeo 3D870 white 2.85mm 1kg

33.90 CHF

7.7 % VAT incl. excl. Shipping costs

Shipping time: in stock

Stock: 25

Product no.: Sakata.3D870.white.2.85

Manufacturer information: Sakata 3d

More products   

  • Details
  • Customer-tip
  • Reviews

Details

PLA Ingeo 3D870 white 2.85mm 1kg - High impact strength PLA

Prints like PLA - but has more impact-resistant than ABS! This even without heat treatment.

The new High Temperatue PLA Ingeo 3D870 prints with ease and has a potential Heat Deflection Temperature (HDT) of as much as 110°C depending on post-processing!

  Ingeo 3D870 Technical Data Sheet

Simple postprocessing: Place the final printed object for 10 - 15 min. in the preheated oven at 80 - 110° C. Switch off the oven and let it cool down. After cooling, the object is temperature-resistant at least up to 90° C.

PLA Ingeo3D870 HT is a robust and high-quality 3D filament, made from biological raw materials, is suitable for all common FDM printer. It is easy to use, making it ideal for the most demanding 3D printing.

Despite the slightly modified composition, our filament retains the familiar and typical properties of PLA. It is thus a little more stable and less brittle than ordinary PLA.

Due to a lower shrinkage factor (1 -1.5%), our PLA Ingeo3D870 will only slightly deform during cooling.


Polylactic acid is a biodegradable plastic from renewable, natural resources and has thus become the most popular material for 3D printing.

Printing temperatur
190-230 °C

Post-annealing temperatur
80 - 110 °C

Heated bed temperatur
Due to the low warp effect is not absolutely necessary. Recommended about 35 - 60 ° C

Warp effekt

very low

Reel size

diameter:  200mm
reel hight:  70mm
Hub hole diameter: 53mm

Storage
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.

Each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to obtain the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height.

Customer-tip

Customers who bought this product also bought the following products:

RepRap-nozzle, E3D, Olsson, TwinClad XT 0.4/3.00mm

RepRap-nozzle, E3D, Olsson, TwinClad XT 0....

M6 nozzle 0.4mm - 3.00mm for RepRap, E3D, Olsson Block , Ultimaker 2+ - TwinClad XT

15.50 CHF

Details
PLA Pro Filament 2.85mm 1kg Navy Blue

PLA Pro Filament 2.85mm 1kg Navy Blue

PLA Pro Spectrum Filament 2.85mm 1kg, Navy Blue

29.50 CHF

Details
SigmaX BCN3D Cover with HEPA filter

SigmaX BCN3D Cover with HEPA filter

SigmaX BCN3D Cover with HEPA filter, DIY Kit

425.00 CHF

Details
BCN3D SigmaX Glass Printbeds with Magnets 5mm

BCN3D SigmaX Glass Printbeds with Magnets 5mm

replacement Printbed for your SigmaX 3d Printer with Magnets!

74.00 CHF

Details
PVA ProFill easy-print Filament 2.85mm water-soluble 0.5kg

PVA ProFill easy-print Filament 2.85mm wat...

500 g, PVA ProFill™ easy-print, suitable for PLA, cold - water-soluble

54.90 CHF

Details
XTC-3D Epoxy 181gr. small

XTC-3D Epoxy 181gr. small

181gr. XTC-3D® High Performance 3D Print Coating - small bottle  

26.00 CHF

Details

Reviews

Customer reviews:

Write evaluation
Product 1 of 3 in this category
Parse Time: 0.204s