PLA Ingeo 3D850 Biopolymer 2.85mm

Workday PLA Ingeo 3D850

Workday PLA Ingeo 3D850 2.85mm

Leicht zu druckendes PLA - für den taglichen Druckjob!

   NatureWorks Ingeo 3D850 PLA  - ein Vergleich mit anderen PLA und ABS Filamente !

This filament was produced from NatureWorks Ingeo™ PLA grade 3D850 resin which was specifically developed for 3D printing!

Spezifikation Ingeo 3d850:

- Schnellere Kristallisationsraten, die erhöhte Druckgeschwindigkeiten ermöglichen
- Erhöhte Schlagzähigkeit (wie ABS)
- verbesserte Hitzebeständigkeit
- Tempern für noch bessere Hitzebeständigkeit
- Drucken mit hoher Auflösung
- gute Haftung auf jedem Druckbett
- reduziertes warping
- Geruchsarm

PLA 850

The popularity of PLA stems from the fact that it is easy to print, doesn’t cause bad odours and is environmentally friendly. However, generic PLA compositions have their cons: in broad terms, PLA compositions we most frequently find on today’s market exhibit low distortion temperatures, high friction coefficients and a low melt flow index.

These attributes translate into a more rigid and delicate 3D print which is harder to extrude and easier to fracture. To overcome some of PLA’s issues and with the objective of improving 3D printing results, NatureWorks, backed by years of experience in the polymer industry, created the PLA Ingeo 3D850 resin.

PLA 850. First and foremost, the melt flow index is higher than ABS plastic. A high melt flow index often means a lower friction coefficient.  This high melt flow index thus yields an advantage because extruder motors have to do less work to extrude the same length of filament (print faster). Also, a higher melt flow index leads to a cooler extruder operating temperatures and less wear on parts. Another advantage is a lowered probability of extruder gear slippage or stripping of the filament when back pressure occurs in the hot end.

When looking at a broader range of 3D printer filaments, it’s typical to see that materials with high impact resistances have conversely low tensile strengths (or vice-versa). The chart shown below (my3dmatter) illustrates how different filaments compare when looking at their tensile strength and impact resistance. We can see that a trade-off between tensile strength and impact resistance is apparent, and it’s rare to see filaments that exhibit both properties at the same time. 

Next, let’s take a closer look at 850’s flexural modulus (i.e. the materials tendency to bend under stress).

So what does having a high flexural modulus mean for 3D printing?

Printing structures that are long and thin will have less deflection or bend under pressure, thus eliminating the need for supports or thick rafts.

One of the biggest issues with PLA is its low heat deflection temperature or heat distortion temperature also known as HDT. HDT is the temperature at which a polymer or plastic will deform under pressure. Historically, when printing parts requiring high resistance to temperature, ABS was the best material. Nowadays, 850’s HDT is a whopping 144°C which means it will suffer minute deformation (if any) below that temperature. When compared to typical ABS and PLA having HDT values of 85°C and 50°C respectively, heat resistance is much improved.

From a usage perspective, filaments made with 3D850 resin feature other enhancements such as excellent bonding with print surfaces, a feature that is significantly improving first layer quality and minimizing the risk of warping. Next, shrinkage of parts during and after printing is also non-existent and virtually no odour is present during extrusion.

In conclusion, 850 shows that the trade-off between tensile and impact strengths can be avoided, allowing very resistant PLA prints. Our PLA Super Premium Series is designed to offer tough and thermally resistant prints, analogous to ABS but without its disadvantages.


PLA Ingeo 3D850 HT weiss 2.85mm 1kg

PLA Ingeo 3D850 HT weiss 2.85mm 1kg

PLA Ingeo 3D850 HT weiss 2.85mm 1kg pro Spule, biologisch unbedenklich

29.50 CHF

Details In den Warenkorb
PLA Ingeo 3D850 HT transparent 2.85mm 1kg

PLA Ingeo 3D850 HT transparent 2.85mm 1kg

PLA Ingeo 3D850 HT transparent 2.85mm 1kg pro Spule, biologisch unbedenklich

29.50 CHF

Details In den Warenkorb
PLA Ingeo 3D850 HT silber 2.85mm 1kg

PLA Ingeo 3D850 HT silber 2.85mm 1kg

PLA Ingeo 3D850 HT silber 2.85mm 1kg pro Spule, biologisch unbedenklich

29.50 CHF

Details In den Warenkorb
PLA Ingeo 3D850 HT schwarz 2.85mm 1kg

PLA Ingeo 3D850 HT schwarz 2.85mm 1kg

PLA Ingeo 3D850 HT schwarz 2.85mm 1kg pro Spule, biologisch unbedenklich

29.50 CHF

Details In den Warenkorb
PLA Ingeo 3D850 HT grau 2.85mm 1kg

PLA Ingeo 3D850 HT grau 2.85mm 1kg

PLA Ingeo 3D850 HT grau 2.85mm 1kg pro Spule, biologisch unbedenklich

29.50 CHF

Details In den Warenkorb
PLA Ingeo 3D850 HT gelb 2.85mm 1kg

PLA Ingeo 3D850 HT gelb 2.85mm 1kg

PLA Ingeo 3D850 HT gelb 2.85mm 1kg pro Spule, biologisch unbedenklich

29.50 CHF

Details In den Warenkorb
PLA Ingeo 3D850 HT blau 2.85mm 1kg

PLA Ingeo 3D850 HT blau 2.85mm 1kg

PLA Ingeo 3D850 HT blau 2.85mm 1kg pro Spule, biologisch unbedenklich

29.50 CHF

Details In den Warenkorb
PLA Ingeo 3D850 HT grün 2.85mm 1kg

PLA Ingeo 3D850 HT grün 2.85mm 1kg

PLA Ingeo 3D850 HT grün 2.85mm 1kg pro Spule, biologisch unbedenklich

29.50 CHF

Details In den Warenkorb
PLA Ingeo 3D850 HT orange 2.85mm 1kg

PLA Ingeo 3D850 HT orange 2.85mm 1kg

PLA Ingeo 3D850 HT orange 2.85mm 1kg pro Spule, biologisch unbedenklich

29.50 CHF

Details In den Warenkorb
PLA Ingeo 3D850 HT pink 2.85mm 1kg

PLA Ingeo 3D850 HT pink 2.85mm 1kg

PLA Ingeo 3D850 HT pink 2.85mm 1kg pro Spule, biologisch unbedenklich

29.50 CHF

Details In den Warenkorb
PLA Ingeo 3D850 HT rot 2.85mm 1kg

PLA Ingeo 3D850 HT rot 2.85mm 1kg

PLA Ingeo 3D850 HT rot 2.85mm 1kg pro Spule, biologisch unbedenklich

29.50 CHF

Details In den Warenkorb
PLA Ingeo 3D850 HT gold 2.85mm 1kg

PLA Ingeo 3D850 HT gold 2.85mm 1kg

PLA Ingeo 3D850 HT gold 2.85mm 1kg pro Spule, biologisch unbedenklich

29.50 CHF

Details In den Warenkorb
PLA Ingeo 3D850 HT purple 2.85mm 1kg

PLA Ingeo 3D850 HT purple 2.85mm 1kg

PLA Ingeo 3D850 HT purple 2.85mm 1kg pro Spule, biologisch unbedenklich

29.50 CHF

Details In den Warenkorb
PLA Ingeo 3D850 HT braun 2.85mm 1kg

PLA Ingeo 3D850 HT braun 2.85mm 1kg

PLA Ingeo 3D850 HT braun 2.85mm 1kg pro Spule, biologisch unbedenklich

29.50 CHF

Details In den Warenkorb
PLA Ingeo 3D850 HT hellblau 2.85mm 1kg

PLA Ingeo 3D850 HT hellblau 2.85mm 1kg

PLA Ingeo 3D850 HT hellblau 2.85mm 1kg pro Spule, biologisch unbedenklich

29.50 CHF

Details In den Warenkorb
Zeige 1 bis 15 (von insgesamt 15 Artikeln) Seiten:  1 
Parse Time: 0.453s