TAULMAN T-Lyne 2.85mm 0.45kg
Recognizing a growing need for 3D printing materials with higher durability as well as unique flexibility, taulman3D and DuPont Packaging & Industrial Polymers (DuPont) worked together to manufacture and release a unique new flexible material to the 3D printing community called T-lyne that uses DuPont™ Surlyn® ionomer.
T-lyne is a unique, crystal clear polyethylene copolymer developed specifically for high durability, flexibility, unique viscosity and a wide temperature range.
Glass-like aesthetics can easily be obtained at high layer sizes using low speed and low temperatures in the range of 190 C to 210 C. Utility style parts are easily printed faster at standard layer sizes using higher temperatures up to 245 C, depending on nozzle size.
Most notably, DuPont™ Surlyn® in T-lyne meets FDA 21CFR 177.1330(a) and can potentially be used in prosthetics where the most unique feature is the ability to immerse a part into hot water, make some minor adjustments, then cool the part and the part will maintain the adjustments as if it were printed in final form. For years, clinics have used polyethylene braces, temporary casts and corrective positioning components to more closely match the end user’s exact needs. The clarity of T-lyne allows one to see into or through a part with as many as 5-8 perimeters and determine where adjustments may be needed. This same clarity is used for non-destructive evaluation of any printed utility part as internal adhesion is paramount. Also, T-lyne has a surface that is not slippery, making hand tools made from T-lyne unlikely to slip out of one’s hand.
NOTE: When T-Lyne is too hot, it will have lots of fine bubbles and a rough texture.
185 - 220 °C
Smaller nozzles than 0.5mm can use a higher temp up to 235°C
Heated bed temperatur
cold Glass or heated to 40°C
reel hight: 60mm
Hub hole diameter: 52mm
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
25mm/s Direct Drive and 18mm/s Bowden - varies from unit to unit
1mm for a 0.1mm nozzle or
2.5mm for a 0.5mm nozzle
Customers who bought this product also bought the following products: