POM (polyoxymethylene) - high strength, hardness and dimensional stability
High impact strength; good leakage current characteristics
Good chemical resistance to solvents, fuels and strong Alkalies and good hydrolysis resistance;
High resistance to thermal and oxidative degradation,
Reduced emissions as for automotive applications.
High qualtiy product Made in Germany!
We also supply the same POM as granules. Ask us!
ATTENTION: Formaldehyde is formed at more than 230° C
Emission nach VDA 275 <5 mg / kg (natural qualties)
Emission nach VDA 275 <5 mg / kg (colored types)
Burning speed after FMVSS 302 <100 mm / min (1 mm thickness)
All data refer to the starting material and not to the article produced by 3D printing. This filament is an experimental material for the 3D printer and rapid prototyping.
Heated bed temperatur
ca. 120°C , Kühlung ausschalten
Adhesion to printing bed
if availabale a POM sheet, print with raft;
or Blue Tape and adhesive spray
reel hight: 80mm
Hub hole diameter: 53mm
|density||DIN EN ISO 1183||1,41|
|Stretching tension||DIN EN ISO 527||62|
|Yield strength||DIN EN ISO 527||9,0%|
|E_Modul||DIN EN ISO 527||2450|
|Shore||DIN EN ISO 868||-|
|Softening temperature||DIN EN ISO 306B||130|
|Notched impact strength||DIN EN ISO 179/23°C||8,5|
|Burning behavior||UL 94 (1,5mm) UL Registrierung||HB|
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
Customers who bought this product also bought the following products: