PVA ProFill™ easy-print Filament 1.75mm water-soluble 0.5kg
The new revolutionary PVA ProFill™ easy-print Filament 1.75mm from 3D-Printerstore.ch opens up new application areas of printing support structures with Double-extruder 3D printers.
PVA ProFill ™ easy-print is much more thermally stable as regular PVA and gives good adhesion with PLA.
This polyvinyl Alcohol-based 3D filament is non-toxic and biodegradable once dissolved in water.
- Excellent Water solubility - the higher the water temperature the faster the dissolution behavior
- printing at low temperature approximately 180-205° C
- good bonding with various plastics such as PLA, ABS and PETT
- biodegradable when dissolved in water
- limited smell
- no more clogging of the nozzle
180-205 °C - do not exceed a printing temperature of 225°C
Heated bed temperatur
Recommended about 35 - 60 ° C
reel hight: 53mm
Hub hole diameter: 53mm
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
Each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to obtain the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height.
Technical specifications PVA ProFill™ easy-print
|vicat softening temp.||ISO 306||60.2 ˚C|
|Specific gravity||ASTM D1505||1,22 g/cc|
|MFR 220°C||2.3 g/10 min|
|Elongation at break|
|Tensile modulus||ISO 527
charpy method 23°C
|ISO 179||notched 1.7 KJ/m²|
|1,75mm||± 0,05mm||≥ 95%|
|2,85mm||± 0,10mm||≥ 95%|
This product is compatible with:
Customers who bought this product also bought the following products: