PVA HT ProFill™ Filament 1.75mm water soluble 0.5kg for ABS, PETG, TPU
PVA-HT (high temperatur printing) is our new water soluble solution for dual extrusion when you need to print with styrene based materials (ABS). PVA-HT has an excellent adherence to ABS, ABS-S, ASA, PETG and TPU.
PVA-HT dissolves slightly slower than regular PVA and it is advised to dissolve in luke-warm water, preferably in circulated water. PVA-HT can handle higher nozzle temperatures (<250°C) without the risk of cross linking and clogging the nozzle and is therefore perfect for printing with styrene based materials which typically print at higher temperatures.
- Good adhesion to styrene-based plastics such as ABS, ASA, PETG and TPU
- Stable at higher nozzle temperatures (<250°C)
- Performs in heated environments up to 55-60 °C
- Good dissolvability in luke warm water
- Biodegradable when dissolved in water
Heated bed temperatur
Recommended about 35 - 60 ° C
reel hight: 53mm
Hub hole diameter: 53mm
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
Each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to obtain the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height.
Technical specifications PVA ProFill™ easy-print
|Specific gravity||ASTM D1505||1,19 g/cc|
|MFR 190˚C / 21,6 kg||58 g/10 min|
|1,75mm||± 0,05mm||≥ 95%|
|2,85mm||± 0,10mm||≥ 95%|
Customers who bought this product also bought the following products: