PLA ProFill™ Filament 1.75mm apple green RAL 6018
The new ProFill™ Premium Filament is the product of collaboration between 3D-Printerstore.ch and main filament developers of Europe.
Uniformity and precision in manufacturing, and an outstanding flow and print characteristics of our filaments, lead to better and consistent print results.
High demands on the printed object and not on the best price of filament - these were the motivations to develop the new ProFill™ Premium Line.
Clearly structured RAL colors - best printing performance - waiving frills - only professional quality!
PLA ProFill™ is a robust and high-quality 3D filament, suitable for all common FDM printer. It is easy to use, making it ideal for the most demanding 3D printing.
Despite the slightly modified composition, our filament retains the familiar and typical properties of PLA. It is thus a little more stable and less brittle than ordinary PLA.
Due to a lower shrinkage factor our ProFill™ PLA will not deform even after cooling.
Polylactic acid is a biodegradable plastic from renewable, natural resources and has thus become the most popular material for 3D printing.
Heated bed temperatur
Due to the low warp effect is not absolutely necessary. Recommended about 35 - 60 ° C
reel hight: 65mm
Hub hole diameter: 53mm
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
Each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to obtain the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height.
Technical specifications ProFill™
|melting temp.||210˚C ± 10˚C|
|melting point||ASTM D3418||145-160˚C|
|vicat softening temp.||ISO 306||± 60˚C|
|Specific gravity||ASTM D1505||1,24 g/cc|
|Melt Flow Index||6,0 g/10 min|
|Tensile strength||ASTM D882||110 MPa (MD)
145 MPa (TD)
|Elongation at break||ASTM D882||160% (MD)
|Tensile modulus||ASTM D882||3310 MPa (MD)
3860 Mpa (TD)
|Impact Strength||7,5 KJ/m²|
|1,75mm||± 0,05mm||≥ 95%|
|2,85mm||± 0,10mm||≥ 95%|
This product is compatible with:
Customers who bought this product also bought the following products:
Author: Christian R. am 07.01.2016
Sehr gutes Filament soweit ich das bis Jetzt Beurteilen kann. Ist nicht so spörde, die Durchmesserabweichungen sind sehr sehr gering und die Farben sind kräftig.
Verwende sie in für meine privaten Teile sowie in meinem Shop www.mein3ddruck.ch