PLA Pro Filament 1.75mm 1kg Navy Blue

  • PLA Pro Filament 1.75mm 1kg Navy Blue
  • PLA Pro Filament 1.75mm 1kg Navy Blue
  • PLA Pro Filament 1.75mm 1kg Navy Blue

29.50 CHF

7.7 % VAT incl. excl. Shipping costs

Shipping time: in stock

Stock: 21

Product no.: PLA.Pro.navyblue.1.75

Manufacturer information: Spectrum Filament

Spectrum Filament Homepage
More products   

For further information, please visit the homepage of this product.
  • Details
  • Customer-tip
  • Reviews

Details

PLA Pro Filament 1.75mm 1kg Navy Blue

Filament Spectrum PLA Pro was manufactured using raw materials developed for 3D printing!

PLA Pro combines two desired features: ease of printing as with normal PLA material while maintaining properties comparable to ABS. Filament Spectrum PLA Pro, after printing, exhibits almost 50% higher impact strength than ABS material. Therefore, when printing from Spectrum PLA Pro, we avoid any difficulties such as: shrinkage or unpleasant odors occurring when printing with ABS.

Filament Spectrum PLA Pro can be treated like HT PLA at about 95 ° C in the oven for 10-15min. After cooling, the model receives an increased (up to about 85 ° C) thermal resistance and almost twice as high impact resistance as ABS.

The material is also characterized by an increased flow index, which simplifies printing and leads to smoother surfaces!

PLA Pro advantages:

  • a good alternative to styrene-based materials
  • printing possible without hot pad
  • easy separation of the object from the table
  • high strenghtness better than ABS 
  • no shrinkage after cooling
  • not flammable
  • ideal side surface of printouts

Filament is reeled on the neat, transparent spool. 

In the original Spectrum Filaments packaging.

Printing temperatur
195-220 °C

Heated bed temperatur
Due to the low warp effect is not absolutely necessary. Recommended about 35 - 60 ° C

Warp effekt

very low

Reel size

diameter:  200mm
reel hight:  76mm
Hub hole diameter: 53mm

Storage
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.

Each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to obtain the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height.

 

Customer-tip

Customers who bought this product also bought the following products:

BLTouch Smart Auto Bed Leveling Sensor V2.0

BLTouch Smart Auto Bed Leveling Sensor V2.0

BLTouch Smart Sensor, the newest version V2.0, Set

45.00 CHF

Details
WANHAO Duplicator i3 Metal Hotend with SLOTTED Cooling Block

WANHAO Duplicator i3 Metal Hotend with SLO...

Micro Swiss WANHAO Duplicator i3 Metal Hotend with SLOTTED Cooling Block , incl. 0.4mm nozzle

49.50 CHF

Details
Bondtech Mini Extruder Kit for Wanhao i3

Bondtech Mini Extruder Kit for Wanhao i3

Bondtech Mini Extruder Kit for Wanhao i3

115.00 CHF

Details
Bondtech Extruderbracket for Wanhao I3+Plus

Bondtech Extruderbracket for Wanhao I3+Plus

Bondtech Extruderbracket for Wanhao I3+Plus

19.50 CHF

Details
MK10 nozzle 0.8mm for All Metal Hotend ONLY

MK10 nozzle 0.8mm for All Metal Hotend ONLY

MK10 nozzle TwinClad XT 0.8mm for All Metal Hotend ONLY (Flashforge, Wanhao, Dremel) 

15.50 CHF

Details
NinjaFlex 1.75mm snow

NinjaFlex 1.75mm snow

1 coil with 0.5 kg Filament - ca. 175 m

45.50 CHF

Details

Reviews

Customer reviews:

Write evaluation
Product 18 of 28 in this category
Parse Time: 0.208s