Metal ProFill copper 1.75mm - 750gr

  • Metal ProFill copper 1.75mm - 750gr
  • Metal ProFill copper 1.75mm - 750gr

48.50 CHF

7.7 % VAT incl. excl. Shipping costs

Shipping time: in stock

Stock: 20

Product no.: Metal.ProFill.copper.1.75

Manufacturer information: 3d-printerstore.ch

3d-printerstore.ch Homepage
More products   

  • Details
  • Customer-tip
  • Reviews

Details

Metal ProFill™ copper 1.75mm - 0.75kg

Our new 80% gravimetric copper filled PLA filament is easy to print, to sand and to polish!

With Metal ProFill™ you can create the most beautiful objects with real METAL characteristics.
It has 3x higher weight then ProFill PLA, has a unique  METAL feel and touch and thermo-conductivity.
Due to the high percentage of fillers Metal ProFill™ has virtually no shrinkage!

A special lubricant increases the flow and prevents Metal ProFill™ to adhere to the nozzle.
This filament that can be printed with almost every type of FDM 3d printer available on the market with retraction enabled on nozzles ≥0.35 mm.

**This filament is more abrasive than standard PLA. Prolonged use will result in accelerated nozzle wear.
   We recommend to use our hardened TwinClad XT nozzles.

           >Tips for Post-Processing of Metal ProFill™ copper Filament

Due to its low tendency to warp can be printed without a heated print bed. If your printer is however equipped with a heated print bed we recommend to set your heat bed temperature to  35° to 60°C.

Polylactic acid is a biodegradable plastic from renewable, natural resources and has thus become the most popular material for 3D printing.

Printing temperatur
195 - 220 °C

Heated bed temperatur
Due to the low warp effect is not absolutely necessary. Recommended about 35 - 60 ° C

Warp effekt
very low

Reel size

diameter:  200mm
reel hight:  65mm
Hub hole diameter: 53mm

Storage
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.

Each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to obtain the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height.

Technical specifications  Metal ProFill™ bronze

Thermal properties

 

 

Description

Testmethod

Typical value

printing temp.

 

195-220˚C

melting temp.

 

195˚C ± 10˚C

vicat softening temp.

ISO 306

± 65˚C

 

 

 

Physical properties

 

 

Description

Testmethod

Typical value

Specific gravity

ISO 1183

3.39 g/cc

Stain at break

ISO 527

8%

Tensile modulus

ISO 527

3990 MPa (MD)

Impact Strength

 ISO 180/A

11,3 KJ/m²

 

 

 

Dimensions

 

 

Size

Ø tolerance

Roundness

1,75mm

± 0,05mm

≥ 95%

2,85mm

± 0,10mm

≥ 95%

 



Customer-tip

Customers who bought this product also bought the following products:

PETG ProFill green transparent 1.75mm 0.75kg

PETG ProFill green transparent 1.75mm 0.75kg

PETG ProFill green transparent, 1.75mm,  0.75kg on spool

34.90 CHF

Details
PETG Spectrum Transparent Red 1.75mm 1kg

PETG Spectrum Transparent Red 1.75mm 1kg

PETG Spectrum Transparent Red 1.75mm 1kg, for high quality printouts

28.50 CHF

Details
PETG Spectrum Transparent Orange 1.75mm 1kg

PETG Spectrum Transparent Orange 1.75mm 1kg

PETG Spectrum Transparent Orange 1.75mm 1kg, for high qualtiy printouts

28.50 CHF

Details
PETG Spectrum Transparent Yellow 1.75mm 1kg

PETG Spectrum Transparent Yellow 1.75mm 1kg

PETG Spectrum Transparent Yellow 1.75mm 1kg, for high qualtiy printouts

28.50 CHF

Details
PETG Spectrum Transparent Blue 1.75mm 1kg

PETG Spectrum Transparent Blue 1.75mm 1kg

PETG Spectrum Transparent Blue 1.75mm 1kg, for high quality printouts

28.50 CHF

Details
PLA Glitter Filament 1.75mm 1kg Emerald Green

PLA Glitter Filament 1.75mm 1kg Emerald Green

PLA Glitter Filament 1.75mm 1kg Emerald Green, with golden glitter

29.50 CHF

Details

Reviews

Customer reviews:

Write evaluation
Product 10 of 11 in this category
Parse Time: 0.221s