CreatBot DX Plus - Dual Extruder

  • CreatBot DX Plus - Dual Extruder
  • CreatBot DX Plus - Dual Extruder
  • CreatBot DX Plus - Dual Extruder
  • CreatBot DX Plus - Dual Extruder
  • CreatBot DX Plus - Dual Extruder
  • CreatBot DX Plus - Dual Extruder
  • CreatBot DX Plus - Dual Extruder

ab 2520.00 CHF

inkl. 8 % MwSt. zzgl. Versandkosten

Lieferzeit: 3-7 Tage

Bestand: 1

Art.Nr.: creatbot.dx.plus

Hersteller Info: Creatbot 3D Printers

Creatbot 3D Printers Homepage
Mehr Artikel   

Für weitere Informationen besuchen Sie bitte die Homepage zu diesem Artikel.
Optionale 3. Düse: 
  • Details
  • Empfehlung
  • Kunden-Tipp
  • Meinungen
  • Downloads

Details

CreatBot DX Plus - Dual Extruder

If Size matters  -   Build Volume 300 x 250 x 520 mm!

Optional mit 3 Extrudern ( Aufpreis Fr. 450.-)

Dieser solid gebaute 3D Drucker hat einen Dual-Druck-Kopf, ein halbgeschlossens Gehäuse mit durchsichtigen Seitenwänden, eine beheiztes Glass-Druckbett und einen Bowden Typ Extruder. Durch den Extruder mit Steppermotor an der Gehäuserückwand wird der Druckkopf vom Gewicht her reduziert. Dies führt zu der höheren Druckgeschwindigkeit. Der CreatBot DX liefert hervorragende Druckergebnisse in PLA und ABS, sowie viele andere Materialien wie lösliches HIPS und PVA. Eine ausgezeichnete Maschine für den Einsatz im Engineering und Schulbereich, für den Produktionseinsatz von Kleinserien, Architekturmodellne, Sculpturen etc.

Gesteuert kann der Creatbot dank der Open Source Funktionalität mit der hauseigenen Software (Cura Basis) oder jeder anderen gängigen Software. Der Druckjob wird am einfachsten über die mitgelieferte SD-Karte angesteuert.

Highlights

  • riesiges Bauvolumen 300 x 250 x 520 mm
  • Metallgehäuse
  • einfach einzustellender Extruder
  • Automatisches Abschalten
  • Multifunktions-Keypad
  • Gear motors feeder
  • Keramik beschichtetes Druckbett
  • Metallhalterung für das Druckbett
  • hohe Auflösung max 0.04mm
  • Filament detection system
  • Drucktemperatur von bis zu 400°C
  • fortführender Druckprozess auch nach einem Stromausfall

 > Download CreatWare Cura-Software


All metal chassisAll metal chassis
A 3D printer requires a certain weight to insure stable operation. This is why a all metal chassis is the best way to go when it comes to 3D printing.

Large build volume
The DX Plus boasts with its impressive build volume of 300 x 250 x 520 mm, that is more than enough for most makers. This means that you can print your creations in 52 cm height and with a resolution of 0.04 mm.

 

  Smart adjustable extruderSmart adjustable extruder
CreatBot extruders have an intelligent cooling system, this ensures that the filament is feeding at the optimal temperature all the time. The height adjustable nozzles allows you to align your two nozzles very quick and easy. Perfect when you want to print with support, different material or just two colors. All CreatBots from 3D Prima comes with dual extruders as standard.



 

 Automatically shutdownAutomatically shutdown
Your CreatBot is equipped with a power management module. When the print is finished and there is no action taken within 5 minutes the printer will shut down. Very useful and very energy efficient.

 

Continued print
If you should have an unexpected power loss the printer remembers the last known position, stores it, lowers and retract the filament. When the power comes back on you can continue to print.
 
Multi-function key padMulti-function key pad
CreatBot has a multi-function keyboard. This makes for very easy handling and direct access to many of the most used functions, including Z shaft up/down, heating/cooling of hot bed, pause, resume print, browse the SD card and more.

 





Gear motors feederGear motors feeder
A gear motor can produce more torque compared to the general stepper motor, this ensures that there is a smooth feeding of the filament at all times and that retraction is perfect.

Filament detection system
If you should run out of filament during a print, don’t worry. The printer will go into pause mode and let you change the filament – then you just hit resume, easy! 
 
 

Ceramic panel hot bedCeramic panel hot bed
On top of a silica heating plate there is a stunning ceramic hot bed which is more expensive then glass but also provides a better heating distribution and a more even heat. The ceramic plate is very smooth and provides a very good adhesion.


High temperature prints
The nozzles can operate in temperatures up to 400 degrees Celsius. This means that you can use a wide range of different filaments. It also provides you with a very stable temperature during printing.

Metal hot bed tray
An all metal hot bed tray makes for a very stable print platform which in turn improves stability.

All enclosed build space

On the CreatBot you have a totally enclosed build space which prevents large prints from being cracked or warped.
 



 
In the box

  • CreatBot DX Plus with dual extruders
  • 1 x SD card
  • 1 x USB cable
  • 1 x Power cable
  • 1 x Tool kit
  • 1 x Manual
  • 2 x spools of 1 kg 3.00 mm filament
  • Cura software on SD card

Machine Parameters

Technologie FFF -Fused Filament Fabrication
Druckfläche / Druckvolumen 300*250*520mm
Schichtstärke 0.04 mm
Druckgeschwindigkeit Up to 120 mm/s
Bauteiltoleranz5 XYZ Axis 0.01 mm
Display Einheit Yes, with key board
Düsentemperatur MAX 400° C
Heizbett MAX 120 ° C
Materialien PLA, ABS, HIPS, PVA, PETG, Woodfill and others
Filament Größe 3.0 mm
Anschlüsse USB and SD card
Chassis All steel
Software included CreatBot multi-language version / Cura Software
File format STL, OBJ, GCode, Amf
Produkt Abmessungen 420*380*790mm
Nozzle diameter 0.4 mm
Supported OS Windows, Linux, Mac OS, OSX
Weight 35Kg
Shipping weight 60Kg
 

 

Empfehlung

Dieses Produkt ist z.B. kompatibel zu:

Proto-Pasta High Temp PLA 2.0v 2.85mm - Silver Smoke

Proto-Pasta High Temp PLA 2.0v 2.85mm - Si...

0.5 kg Filament pro Spule High Temperature PLA 2.85mm, Silver Smoke

49.90 CHF

Details
3DLac Haftspray

3DLac Haftspray

3DLac Haftkelber für den 3D-Druck, 400 ml Spray

Unser bisheriger Preis 10.90 CHF
Jetzt nur 9.50 CHF
Sie sparen 13 % / 1.40 CHF

Details

Kunden-Tipp

Kunden, die diesen Artikel kauften, haben auch folgende Artikel bestellt:

ABS Filament Best Value 1.75mm schwarz 1kg

ABS Filament Best Value 1.75mm schwarz 1kg

ABS Filament Best Value 1.75mm schwarz 1kg

22.50 CHF

Details
ABS Filament Best Value 2.85mm grün 1kg

ABS Filament Best Value 2.85mm grün 1kg

ABS Filament Best Value 2.85mm grün 1kg

22.50 CHF

Details
WANHAO Duplicator i3 Plus

WANHAO Duplicator i3 Plus

WANHAO Duplicator i3 Plus, Druckbett beheizt, 200 X 200 X 180mm, Touch display

560.00 CHF

Details
bq PLA Filament 1.75mm aubergine

bq PLA Filament 1.75mm aubergine

1 kg Filament pro Spule

24.90 CHF

Details
ProFill D'Limonene 1 lt./0.85kg

ProFill D'Limonene 1 lt./0.85kg

ProFill™ D'Limonene 1 Liter

32.50 CHF

Details
HIPS ProFill Filament 2.85mm natural

HIPS ProFill Filament 2.85mm natural

750 gr. Filament  HIPS ProFill TM pro Spule

34.90 CHF

Details

Meinungen

Kundenrezensionen:

Bewertung schreiben

Downloads

Datei:

Creatware Software

 

Windows-middle

CreatWare for Windows                   

 
MacOS_X-middle

 

CreatWare for MAC

 

 

Adobe_PDF-middle

CreatBot User Manual 

 

4 KB Download
Artikel 2 von 5 in dieser Kategorie
Parse Time: 0.215s