CreatBot D600 - Dual Extruder

  • CreatBot D600 - Dual Extruder
  • CreatBot D600 - Dual Extruder
  • CreatBot D600 - Dual Extruder
  • CreatBot D600 - Dual Extruder
  • CreatBot D600 - Dual Extruder

10600.00 CHF

inkl. 8 % MwSt. zzgl. Versandkosten

Lieferzeit: ca. 3-4 Wochen ab Bestellung heute

Bestand: 1

Art.Nr.: creatbot.d600

Hersteller Info: Creatbot 3D Printers

Creatbot 3D Printers Homepage
Mehr Artikel   

Für weitere Informationen besuchen Sie bitte die Homepage zu diesem Artikel.
  • Details
  • Empfehlung
  • Kunden-Tipp
  • Meinungen
  • Downloads

Details

CreatBot D600 - Dual Extruder - der Grösste!

If Size matters  -   Build Volume 600 x 600 x 600mm!

Dieser solid gebaute 3D Drucker hat einen Dual-Druck-Kopf, ein geschlossens Gehäuse mit durchsichtigen Seitenwänden, Deckel und Fronttüre, eine beheiztes Glass-Druckbett und Direct Drive Extruder.  Der CreatBot D600  liefert hervorragende Druckergebnisse in PLA und ABS, sowie viele andere Materialien wie lösliches HIPS und PVA. Eine ausgezeichnete Maschine für den Einsatz im Engineering und Schulbereich, für den Produktionseinsatz von Kleinserien, Architekturmodellne, Sculpturen etc.

Gesteuert kann der Creatbot dank der Open Source Funktionalität mit der hauseigenen Software (Cura Basis) oder jeder anderen gängigen Software. Der Druckjob wird am einfachsten über die mitgelieferte SD-Karte angesteuert.

Highlights

  • riesiges Bauvolumen 600 x 600 x 600 mm
  • Metallgehäuse, Seitenwände, Deckel und Türe in Plexiglas
  • einfach einzustellende Extruder
  • Automatisches Abschalten
  • Multifunktions-Touchpad
  • Gear motors feeder
  • Keramik beschichtetes Druckbett
  • Metallhalterung für das Druckbett
  • hohe Auflösung max 0.04mm
  • Filament detection system
  • Drucktemperatur von bis zu 400°C
  • fortführender Druckprozess auch nach einem Stromausfall

 > Download CreatWare Cura-Software


All metal chassisAll metal chassis
A 3D printer requires a certain weight to insure stable operation. This is why a all metal chassis is the best way to go when it comes to 3D printing.

Large build volume
The D600 boasts with its impressive build volume of 600 x 600 x 600 mm, that is more than enough for most makers. This means that you can print your creations in 60 cm height and with a resolution of 0.04 mm.

 

  Smart adjustable extruderSmart adjustable extruder
CreatBot extruders have an intelligent cooling system, this ensures that the filament is feeding at the optimal temperature all the time. The height adjustable nozzles allows you to align your two nozzles very quick and easy. Perfect when you want to print with support, different material or just two colors. All CreatBots from 3D Prima comes with dual extruders as standard.



 

 Automatically shutdownAutomatically shutdown
Your CreatBot is equipped with a power management module. When the print is finished and there is no action taken within 5 minutes the printer will shut down. Very useful and very energy efficient.

 

Continued print
If you should have an unexpected power loss the printer remembers the last known position, stores it, lowers and retract the filament. When the power comes back on you can continue to print.
 
Multi-function key padMulti-function Touchpad
CreatBot has a multi-function touchpad. This makes for very easy handling and direct access to many of the most used functions, including Z shaft up/down, heating/cooling of hot bed, pause, resume print, browse the SD card and more.

 






Filament detection system
If you should run out of filament during a print, don’t worry. The printer will go into pause mode and let you change the filament – then you just hit resume, easy! 
 
 

Ceramic panel hot bedCeramic panel hot bed
On top of a silica heating plate there is a stunning ceramic hot bed which is more expensive then glass but also provides a better heating distribution and a more even heat. The ceramic plate is very smooth and provides a very good adhesion.


High temperature prints
The nozzles can operate in temperatures up to 400 degrees Celsius. This means that you can use a wide range of different filaments. It also provides you with a very stable temperature during printing.

Metal hot bed tray
An all metal hot bed tray makes for a very stable print platform which in turn improves stability.

All enclosed build space

On the CreatBot you have a totally enclosed build space which prevents large prints from being cracked or warped.
 

 


In the box

  • CreatBot D600 with dual extruders
  • Packed in a wood crate
  • 1 x SD card
  • 1 x USB cable
  • 1 x Power cable
  • 1 x Tool kit
  • 1 x Manual
  • 2 x spools of 1 kg 3.00 mm filament
  • Cura software on SD card

Machine Parameters

Technologie FFF -Fused Filament Fabrication
Druckfläche / Druckvolumen 600*600*600mm
Schichtstärke 0.04 mm
Druckgeschwindigkeit Up to 120 mm/s
Bauteiltoleranz5 XYZ Axis 0.01 mm
Display Einheit Touchpad
Düsentemperatur MAX 400° C
Heizbett MAX 120 ° C
Materialien PLA, ABS, HIPS, PVA, PETG, Woodfill and others
Filament Größe 3.0 mm / 2.85mm
Anschlüsse USB and SD card
Chassis All steel
Software included CreatBot multi-language version / Cura Software
File format STL, OBJ, GCode, Amf
Produkt Abmessungen 91 x 84 x 110 cm (inkl. Rollen)
Nozzle diameter 0.4 mm
Supported OS Windows, Linux, Mac OS, OSX
Weight 180kg
Shipping weight ca. 260Kg
 

 

Empfehlung

Dieses Produkt ist z.B. kompatibel zu:

Proto-Pasta High Temp PLA 2.0v 2.85mm - Silver Smoke

Proto-Pasta High Temp PLA 2.0v 2.85mm - Si...

0.5 kg Filament pro Spule High Temperature PLA 2.85mm, Silver Smoke

49.90 CHF

Details
3DLac Haftspray

3DLac Haftspray

3DLac Haftkelber für den 3D-Druck, 400 ml Spray

10.90 CHF

Details

Kunden-Tipp

Kunden, die diesen Artikel kauften, haben auch folgende Artikel bestellt:

Creatbot Stainless Steel Düse 0.4mm

Creatbot Stainless Steel Düse 0.4mm

Creatbot Stainless Steel Düse 0.4mm

22.00 CHF

Details
Creatbot Stainless Steel Düse 0.6mm

Creatbot Stainless Steel Düse 0.6mm

Creatbot Stainless Steel Düse 0.6mm

22.00 CHF

Details
PLA ProFill Filament 2.85mm 1 kg iron grey RAL 7011

PLA ProFill Filament 2.85mm 1 kg iron grey...

1kg Filament  ProFill™ pro Spule

34.90 CHF

Details
CreatBot DX Plus - Dual Extruder

CreatBot DX Plus - Dual Extruder

CreatBot DX Plus - Dual Extruder - 300 x 250 x 520 mm

ab 2520.00 CHF

Details
PLA ProFill Filament 2.85mm 1 kg red RAL 3020

PLA ProFill Filament 2.85mm 1 kg red RAL 3020

1kg Filament  ProFill™ pro Spule

34.90 CHF

Details
PLA ProFill Filament 2.85mm 1 kg sky blue RAL 5015

PLA ProFill Filament 2.85mm 1 kg sky blue ...

1kg Filament  ProFill™ pro Spule

34.90 CHF

Details

Meinungen

Kundenrezensionen:

Bewertung schreiben

Downloads

Datei:

Creatware Software

Windows-middle

CreatWare for Windows                   

 
MacOS_X-middle

 

CreatWare for MAC


 

Adobe_PDF-middle

 

CreatBot D600 short Manual 

4 KB Download
Artikel 6 von 13 in dieser Kategorie
Parse Time: 0.194s