CreatBot F430 - Dual Extruder mit 1.75mm direct drive
If Size matters - Build Volume 400 x 300 x 300mm!
Support 420°C Hotend
We are the first one to publish 420°C high temperature nozzle to 3d printer market. F430 equiped with dual extruders and this kind of extruder allow to print with a variety of filaments. The nozzles height can also be micro adjusted
High Precision & High Speed
We exclusively research and develop the extruder feeding system and guide rail, which support high-speed printing. Its printing accuracy can reach high to 0.04mm,and it allows to extrude filament steady without block
The whole-steel body not only ensure the stability when printing, but also extend the usage period greatly. Its optimization and cooperation of overall structure ensure the sustainable and efficient operation. The first batch of CreatBot 3D printers have been working for 5 years and more than 8000 hours.
Fully Enclosed High-Temperature Chamber
Fully enclosed chamber can block all external interference and reduce noise. Hot chamber can provide constant room temperature so that model won’t deform when printing. Heatable up to 70°C.
Outage Restored & Filament Detection
The printer will automatically memorize the current position and save print data. Lower the platform and withdraw filament when power off suddenly. It will continue print from where it stopped after power’s on.
The printer will avoid invalid printing by stoping print and warning when filament runs out.
The printer have all-English-menu touch screen, easy operation and friendly use. One key to warm,one key to print as well as many other shortcut keys.
Automatic Leveling Platform BL-Touch
Use of 25 points through the probe to save the level of platform flatness data at the initial, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.
The printer has mico-crystal platform so that can support hight thermal efficiency, you can set the parameters to turn off the hot bed automatically after the specified number of layers.
Air Filter System
The air filter system can adsorb impurities and gases that generated by printing special filament, more safe and environmental protection which is more suitable for house, school, office space.
In the box
- CreatBot F430 with dual extruders
- 1 x SD card
- 1 x USB cable
- 1 x Power cable
- 1 x Tool kit
- 1 x Manual
- 2 x spools of 1 kg 1.75 mm filament
- Cura software on SD card
Kunden, die diesen Artikel kauften, haben auch folgende Artikel bestellt: