WANHAO Duplicator 6 All Metal Hotend with SLOTTED Cooling Block

  • WANHAO Duplicator 6 All Metal Hotend with SLOTTED Cooling Block
  • WANHAO Duplicator 6 All Metal Hotend with SLOTTED Cooling Block
  • WANHAO Duplicator 6 All Metal Hotend with SLOTTED Cooling Block
  • WANHAO Duplicator 6 All Metal Hotend with SLOTTED Cooling Block

59.50 CHF

7.7 % VAT incl. excl. Shipping costs

Shipping time: in stock

Stock: 8

Product no.: D6.MS.all.metal.kit.0.4mm

Manufacturer information: Micro Swiss

Micro Swiss Homepage
More products   

  • Details
  • Customer-tip
  • Reviews

Details

WANHAO Duplicator 6 All Metal Hotend with SLOTTED Cooling Block - 0.4mm nozzle

This is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6 with the following improvements:

  • Slotted Clamping system
  • No set screw to ding and damage thermal tube
  • Significantly better heat transfer (this is a big one!!!)
  • Easier disassemble and adjustments
  • Precise control on bore diameter

    Installation-Manual

Micro Swiss All Metal Hotend Kit Features:

This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn't have enough thermal conductivity to properly melt all the plastic coming out. On original extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.

Orifice size available: .2mm, .3mm, .4mm, .5mm, .6mm, .8mm, 1mm, 1.2mm

Kit includes

  • 1 Plated Brass Wear Resistant Nozzle
  • 1 Thermal tube
  • 1 Slotted Cooling block

Customer-tip

Customers who bought this product also bought the following products:

ABS-S Spezial Filament 1.75mm white 1 kg, AntiWarp

ABS-S Spezial Filament 1.75mm white 1 kg, ...

ABS-S Spezial Filament 1.75mm white 1 kg, in industrial quality, fast-flowing

37.00 CHF

Details
Wanhao Metal-Pad 220x220 - Duplicator 6 / i3 Plus MkII

Wanhao Metal-Pad 220x220 - Duplicator 6 / ...

Wanhao Metal-Pad 220x220 - Duplicator 6 / i3 Plus MkII

12.50 CHF

Details
Bondtech Extruder Kit for Wanhao D6

Bondtech Extruder Kit for Wanhao D6

Bondtech Extruder Kit for Wanhao D6

128.00 CHF

Details
PLA Pro Filament 1.75mm 1kg Polar white

PLA Pro Filament 1.75mm 1kg Polar white

PLA Pro Spectrum Filament 1.75mm 1kg, Polar white

29.50 CHF

Details
PLA Pro Filament 1.75mm 1kg ivory beige

PLA Pro Filament 1.75mm 1kg ivory beige

Spectrum PLA Pro Filament 1.75mm 1kg ivory beige

29.50 CHF

Details
MK10 nozzle 0.8mm for All Metal Hotend ONLY

MK10 nozzle 0.8mm for All Metal Hotend ONLY

MK10 nozzle TwinClad XT 0.8mm for All Metal Hotend ONLY (Flashforge, Wanhao, Dremel) 

15.50 CHF

Details

Reviews

Customer reviews:

Write evaluation
Product 29 of 84 in this category
Parse Time: 0.200s