E3D Hemera Direct Kit 1.75mm 24V

  • E3D Hemera Direct Kit 1.75mm 24V
  • E3D Hemera Direct Kit 1.75mm 24V
  • E3D Hemera Direct Kit 1.75mm 24V
  • E3D Hemera Direct Kit 1.75mm 24V
  • E3D Hemera Direct Kit 1.75mm 24V

148.50 CHF

7.7 % VAT incl. excl. Shipping costs

Shipping time: in stock

Stock: 10

Product no.: e3d.hemera.D.175.24V

Manufacturer information: e3d Online

e3d Online Homepage
More products   

  • Details
  • Customer-tip
  • Reviews

Details

E3D Hemera Direct Kit 1.75mm 24V
 

  Hemera Data Sheet

Dual-Drive
For E3D Hemera, we opted for a hardened stainless steel dual-drive arrangement which provides a huge boost in grip over single drive systems, in fact, we’re able to push filament with up to 10kg of force. The secondary gear shaft is on a moveable, sprung idler which allows the user to adjust filament tension.

Compact, Integrated System
Hemera is a system of components designed to work seamlessly together as a single compact product. It has a custom motor which is based on a NEMA17, along with our own faceplate designs which has allowed us to add our own features for user convenience, such as mounting slots as well as produce a very compact system.

Filament Constraint Like No Other

Hemera constrains filament like no other extrusion system, fact. You won’t experience the full extent of its unrivalled filament constraint until you print ultra-flexible materials. This exceptional filament constraint also has a significant impact on printing rigid, and semi-rigid materials such as PLA or Nylon.

Mounting
Hemera features convenient T-Slots for easy mounting to your printer, plus space for other accessories, part cooling fans and bed levelling probes to name a couple.

A Never-Before-Seen Heatsink
Hemera’ heatsink design ensures airflow is diverted up and away from both the HotEnd and the heated bed, reducing the risk of warping and uneven stresses forming in the printed part.

User-centered Design
All interaction with Hemera is from the top. To set filament tension the user simply twists a thumbscrew and a cam slider mechanism with a captive nut compresses a spring and loads the idler. Filament tension is increased by rotating clockwise and decreased by rotating counterclockwise. Simple.

Should you need to disassemble Hemera for maintenance, the internal mechanisms are easily accessible by removing the fan, and undoing the two faceplate screws. Full access is available to clean and replace parts even while filament is loaded. When you pop off the faceplate the filament, idler and spring all come along too, as one neat assembly.

What's in the box

  • 1 x 24V 30W Heater cartridge
  • 1 x Thermistor cartridge
  • 1 x Molex cable
  • 1 x 40 x 40 x 10 mm 24V Fan
  • 1 x Cable tie
  • 1 x E3D Hemera sink
  • 1 x Idler
  • 1 x Idler slide block
  • 1 x Idler spring block
  • 1 x Thumbwheel
  • 1 x Idler shaft
  • 1 x Drive hobb
  • 1 x Idler hobb
  • 1 x V6 Heater Block
  • 1 x E3D Hemera motor
  • 1 x Motor cable 
  • 1 x E3D Hemera fixings kit
  • 1 x V6 fixings kit
  • 1 x E3D Hemera heatbreak
  • 1 x Brass 1.75mm, 0.4mm nozzle
  • 1 x V6 sock
  • 1 x Thermal compound

 

Customer-tip

Customers who bought this product also bought the following products:

BLTouch Smart Auto Bed Leveling Sensor V3.0

BLTouch Smart Auto Bed Leveling Sensor V3.0

BLTouch Smart Sensor, the version V3.0, Set

45.00 CHF

Details
RepRap-Nozzle, E3D, Olsson, TwinClad XT 0.4/1.75mm

RepRap-Nozzle, E3D, Olsson, TwinClad XT 0....

M6 nozzle 0.4mm - 1.75mm for RepRap, E3D, Olsson Block - TwinClad XT

15.50 CHF

Details
3DLac Adhesion spray

3DLac Adhesion spray

3DLac adhesives for 3D printing , 400 ml spray

8.50 CHF

Details
PETG Spectrum Deep Black 1.75mm 1kg

PETG Spectrum Deep Black 1.75mm 1kg

PETG Spectrum Deep Black RAL 9017, 1.75mm 1kg, for high qualtiy printouts

28.50 CHF

Details

Reviews

Customer reviews:

Write evaluation
Product 2 of 18 in this category
Parse Time: 0.280s