WolfBite for ABS PETG TPE TPU 60ml

  • WolfBite for ABS PETG TPE TPU 60ml
  • WolfBite for ABS PETG TPE TPU 60ml
  • WolfBite for ABS PETG TPE TPU 60ml

24.50 CHF

7.7 % VAT incl. excl. Shipping costs

Shipping time: in stock

Stock: 22

Product no.: wolfbite.ABS.TPU

Manufacturer information: WolfBite-Airwolf

WolfBite-Airwolf Homepage
More products   

  • Details
  • Customer-tip
  • Reviews

Details

WolfBite for ABS PETG TPE TPU 60ml -  Premium Glass Bed Adhesion Solution

Win the war on warpage with the original formula that started the Wolfbite craze! Our patent-pending Wolfbite makes your ABS, PETG, TPU, and TPE parts stick to your 3D printer bed and then release easily once cooled. For use with any 3D printer with a heated bed.

Wolfbite Bed Adhesion Solution (Original Formula)

  • 3D Printer Adhesive Prevents Parts From Warping
  • Easy to Apply
  • Helps bond ABS, PETG, TPU, and TPE filament to heat bed
  • Low odor
  • Long-lasting
  • 2 and 4 FL. OZ bottle with applicator (yields a minimum of 100 and 200 uses)
  • Safety Data Sheet (SDS)

No More 3D Printed Part Warping
Patent-pending Wolfbite is a premium solution specially engineered to bond Acrylonitrile Butadiene Styrene (ABS), Polyethylene terephthalate (PETG), Thermoplastic Elastomer (TPE), and Thermoplastic Polyurethane (TPU) plastic parts directly to a heated glass 3D printing surface without lifting—also known in the industry as “warpage,”—and to enable smooth release of objects after printing. ABS is a preferred material for 3D printing because of its durable nature and options for post processing. However, ABS, PETG, TPE and TPU must be printed on a prepared surface for correct adhesion. A common surface treatment includes applying polyethylene terephthalate (PET) film or Kapton tape to a glass plate and treating the surface with a slurry of dissolved ABS and acetone. After several uses, the film may become damaged, which results in the parts becoming difficult to remove, or lifting off the film.

Wolfbite Stops 3D Printed Parts From Warping

Wolfbite 3D Printer Adhesive is applied with an applicator brush straight onto the glass, eliminating the need for PET film or Kapton tape. One light coat of Wolfbite can be used for several prints. After applying Wolfbite, the glass is heated and ABS parts stick firmly to the glass without warpage. Airwolf 3D specially formulated the proprietary solution to not only promote excellent adhesion but also to make part removal easy. Once the 3D printed parts have cooled, they will dismount from the printing surface with minimal effort, leaving a clean and smooth bottom surface. Wolfbite is packaged in a two fluid ounce container and comes with a foam brush applicator.

 

Customer-tip

Customers who bought this product also bought the following products:

LokBuild 3D Print Surface 432 x 432mm

LokBuild 3D Print Surface 432 x 432mm

LokBuild 3D Print Surface 432 x 432mm, single foil,

41.50 CHF

Details
PEI Ultem Print Surface 500x500mm/0.4mm

PEI Ultem Print Surface 500x500mm/0.4mm

PEI Ultem Sheet Print Surface 500x500mm/0.4mm with 3M 468MP Adhesive Tape, can be cutted

37.50 CHF

Details
Taulman PCTPE - flexible Nylon Co-Polymer

Taulman PCTPE - flexible Nylon Co-Polymer

0.45 kg PCTPE on spool

35.50 CHF

Details
PVA ProFill HT Filament 2.85mm 0.5kg

PVA ProFill HT Filament 2.85mm 0.5kg

PVA HT ProFill Filament, cold - water-soluble, 0.5kg, for ABS, PETG und TPU

55.50 CHF

Details
BVOH Verbatim Filament 2.85mm water-soluble 0.5kg

BVOH Verbatim Filament 2.85mm water-solubl...

BVOH Verbatim Filament 2.85mm water-soluble 0.5kg

96.50 CHF

Details
Kapton Sheet 2-Pack 250 x 220 mm / 0.18mm

Kapton Sheet 2-Pack 250 x 220 mm / 0.18mm

Kapton sheet extra-strong in 2-pack,  250 x 220 mm / 0.18mm, fits Craftbot Plus

11.50 CHF

Details

Reviews

Customer reviews:

Write evaluation
Product 3 of 34 in this category
Parse Time: 0.233s