WolfBite Nano for PLA 60ml

  • WolfBite Nano for PLA 60ml
  • WolfBite Nano for PLA 60ml
  • WolfBite Nano for PLA 60ml

24.50 CHF

7.7 % VAT incl. excl. Shipping costs

Shipping time: in stock

Stock: 12

Product no.: wolfbite.nano

Manufacturer information: WolfBite-Airwolf

WolfBite-Airwolf Homepage
More products   

  • Details
  • Customer-tip
  • Reviews

Details

WolfBite Nano for PLA -  Premium Glass Bed Adhesion Solution

Forget the painter's tape. Wolfbite Nano has arrived! Designed for use on all 3D printers, patent-pending Wolfbite Nano prevents PLA parts from warping.

Wolfbite Nano is a premium solution specifically engineered to bond polylactic acid (PLA) plastic parts to a glass 3D printer build plate without lifting, also known in the industry as “warpage,” and to enable smooth release of objects after printing. This patent-pending solution works well with heated and non-heated beds on all types and brands of the 3D printers utilizing glass printing surfaces.

PLA is the most preferred material for 3D printing because of its low heat shrinkage, biodegradability and widespread availability. However, PLA must be printed on a prepared surface for correct adhesion. A common surface treatment includes applying blue or red “painter’s” tape to a glass plate. After use, the paper tape may become damaged or require replacement. Other issues associated with printing on painter’s tape is difficulty in removing parts after prints and warpage from insufficient adhesion. Airwolf’s new solution addresses all these issues. WolfBite Nano is applied with an applicator brush straight onto glass, eliminating the need for tape. One light coat of Wolfbite can be used for several prints.

After applying Wolfbite Nano directly on glass, printing can commence immediately, either with a heated or room-temperature bed. Airwolf 3D specially formulated the proprietary solution to not only promote excellent adhesion but also to make part removal easy. Parts maybe removed post print by immersing the glass plate in water for a short period of time, if necessary.

The solution is based on a combination of green chemistry and nanotechnology to create the best possible adhesion using compounds which are generally regarded as safe. Wolfbite is packaged in a two fluid ounce container and comes with a foam brush applicator.

Safety Data Sheet (SDS)

DIRECTIONS

  • Shake well Remove lid and dip foam applicator into solution. (May be neccessary to warm bottle for 5-10 seconds max in microwave.)
  • Apply by painting on cold glass with long strokes, covering the entire build area.
  • Place glass onto heatbed and preheat.

ADDITIONAL TIPS

  • Clean glass plate and applicator with clean water only. Soap and other cleansers will contaminate Wolfbite solution and cause unstable performance.
  • To remove excess formula, razor blade may be used to gently scrape the glass plate under running water. Please exercise caution.

 

Customer-tip

Customers who bought this product also bought the following products:

AprintaPro PrintaStick 50ml

AprintaPro PrintaStick 50ml

AprintaPro PrintaStick solves adhesion problems with heated building board, stick with 50 ml

11.50 CHF

Details
Glue Stick for 3D Printer

Glue Stick for 3D Printer

Non-toxic Washable Anti-Tilt Glue Stick for 3D Printer

4.50 CHF

Details
MK10 All Metal Hotend Conversion Kit - 0.4mm nozzle

MK10 All Metal Hotend Conversion Kit - 0.4...

MK10 All Metal Hotend Conversion Kit - 0.4mm nozzle, for Flashforge, Dremel, Wanhao

39.50 CHF

Details
MK10 Nozzle TwinClad XT 0.4mm

MK10 Nozzle TwinClad XT 0.4mm

MK10 0.4mm nozzle TwinClad XT for Flashforge / Wanhao

15.50 CHF

Details
MK10 nozzle 0.6mm for All Metal Hotend ONLY

MK10 nozzle 0.6mm for All Metal Hotend ONLY

MK10 nozzle TwinClad XT 0.6mm for All Metal Hotend ONLY (Flashforge, Wanhao, Dremel) 

15.50 CHF

Details
1m Teflon-Tube / PTFE 4x2mm

1m Teflon-Tube / PTFE 4x2mm

1 lfm PTFE - ISOLATION TUBE /  Teflon 4x2mm

15.00 CHF

Details

Reviews

Customer reviews:

Write evaluation
Product 2 of 36 in this category
Parse Time: 0.192s