PEI Ultem Print Surface 400x400mm/0.4mm

  • PEI Ultem Print Surface 400x400mm/0.4mm
  • PEI Ultem Print Surface 400x400mm/0.4mm
  • PEI Ultem Print Surface 400x400mm/0.4mm

27.50 CHF

7.7 % VAT incl. excl. Shipping costs

Shipping time: in stock

Stock: 91

Product no.: PEI.sheet.400*400

Manufacturer information: 3d-printerstore.ch

3d-printerstore.ch Homepage
More products   

For further information, please visit the homepage of this product.
  • Details
  • Customer-tip
  • Reviews

Details

PEI Ultem Sheet Print Surface 400x400mm/0.4mm with 3M 468MP Adhesive Tape

PEI (Polyetherimide), also known as Ultem sheets, provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down.

PEI Sheet Features
  • Great for printing ABS and PLA (along with many other materials) directly on to print surface without the need for additional adhesives or tape.
  • Single 0.4mm sheet installs quickly on top of existing build platform using the 3M Adhesive Transfer Tape.
  • Blue protective film guards against scratches during shipping. Remove film before using PEI sheet.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
  • Includes: 1x PEI Sheet, 1x 3M 468MP Transfer Tape

How To Use
PEI is easily cut to size by scoring with a hobby knife. Laminate your sheet of PEI using 3M 468MP Adhesive Transfer Tape that came with the PEI sheet to a glass/mirror print bed, keeping in mind that 3M 468MP is a very sticky tape that is prone to clumping. Once you have laminated your sheet of PEI onto your glass, simply re-level your print bed and print away. Parts should come free from the surface with almost no issue at all. PLA does not require heat, but turning the heated bed up to 45C helps. After the print is done, just let the plate cool down and then gently you can just “pop” the model off the plate.

Before each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you wipe away any grease or other residues that may have accumulated on the surface. This will help increase your surface adhesion greatly. 

Use isopropyl alcohol, methyl alcohol, or soap to clean your PEI after use. In other words, PEI can be cleaned through the use of Isopropyl Alcohol, which will theoretically help adhesion should you lose it.

Customer-tip

Customers who bought this product also bought the following products:

MK8 Nozzle TwinClad XT 0.4mm

MK8 Nozzle TwinClad XT 0.4mm

MK8 nozzle for Craftbot, Witbox, Hephestos 2, Creality CR10, MakerBot TwinClad XT 0.4mm

15.50 CHF

Details
Raise3D Pro2 Hotend assembly

Raise3D Pro2 Hotend assembly

Raise3D Pro2 Hotend assembly, complete 

114.00 CHF

Details
3M Scotch Blue Tape 2090

3M Scotch Blue Tape 2090

3M Scotch Blue Tape 2090 - 50mm the Original - for better adhesion on the print bed

14.95 CHF

Details
Raise3D Pro2 V3H Nozzle 0.4 mm

Raise3D Pro2 V3H Nozzle 0.4 mm

Raise3d Pro 2 nozzle 0.4mm fits Raise3d Pro2 / Plus

28.50 CHF

Details
Raise3D Pro2 3D-Printer

Raise3D Pro2 3D-Printer

Raise3D Pro2 3D-Printer Dual-Extruder - 3 05x305x300 mm - the next step in 3d printing!   

4725.00 CHF

Details
Raise3D Pro2 Buildplate with protector handle

Raise3D Pro2 Buildplate with protector handle

Raise3D Pro2 Buildplate with red protector

116.50 CHF

Details

Reviews

Customer reviews:

Write evaluation
Product 18 of 34 in this category
Parse Time: 0.211s