Magigoo – The 3D printing adhesive – single pen (50ml) Version V1
MAGIGOO is THE 3D printing adhesive specifically designed to tackle adhesive problems. The formulation of MAGIGOO ensures that it works with PLA, ABS and other filaments. It works on heated beds offering strong adhesion when the bed is hot. As soon as the bed cools back down all the adhesion is lost allowing the print to be gently removed. Removal tools and super human powers not needed.
One MAGIGOO pen will last for over a 100 prints.
Recommended print bed temperature approx. 40° C.
Get a single pen. We are sure you will be back for more … it is that good
Magigoo is suitable for the printing of PLA, PETG and ABS filaments.
Dimensions: 3 x 3 x 16cm
Customers who bought this product also bought the following products:
Our previous price
Now only 35.55 CHF
you save 10 % / 3.95 CHF
Author: Guest am 22.03.2019
I use this on a heated glass (borosilicate) bed. For ABS the bed is set to 100C (surface approx 88C) for PLA temp is set to 50C (Surface approx 42C).
The Magigoo works perfect under the following conditions:
Spread enough Goo so you have a good bonding layer (layer not too thin).
Then it works perfect, no warping and after the bed has cooled down to approx 25C the object is completely loose.
The only not optimal thing is the tip of the bottle. The spreader works only when you are patient and shake the bottle well. Also it is not perfectly smooth. You have "stripes" because of the spreader.
I understand that the manufacturer changed the tip. Probably that is the reason why presently Magigoo is on sale here.